成人小视频免费,一级毛片在线视频免费观看,在线观看自拍

Characteristics and advantages of IMPRESIND gas radiant heating system

time：2023-07-21
hits：1577次
source：正弘奧能

Radiant heating is a heating method that uses the principle of radiant heat transfer to directly transfer heat to the human body and objects in the heating room, rather than heating the air in the room.For large space, the most suitable is the gas radiation heating system, which can avoid the traditional convection mode of large load, installation difficulties and space temperature distribution inequality.


	 


	Compared with the traditional radiant heating system, the heat transfer process is simplified, which not only reduces the heating equipment, but also reduces the heat loss and improves the energy utilization rate.In addition, the gas radiant heating system can be started as required.The actual operation time of the gas radiation heating system is short, it does not have to run all day like the traditional heating method using the heating boiler as a heat source, and can reduce a lot of maintenance work and staff, so it can save a lot of operating costs.


	 


	<img src="http://www.mhsc009.cn/Uploads/image/20230721/20230721154520_53352.png" alt="" /> 


	 


	IMPRESIND gas radiation heating system as the main heating equipment of Beijing Leadway Power&nbsp;Co., LTD., through more than 10 years of promotion and application, has become one of the leading products in the Chinese market.IMPRESIND gas radiant heating system eliminates large and complex boiler and boiler room equipment, short installation cycle, and does not occupy the building's use area.There is no loss of gas in the transmission process, and the combustion of the generator is very complete, so the heat of the entire heating system can be fully utilized.


	 


	IMPRESIND gas radiant heating system is mainly composed of three major components, including heat generator, radiation pipe section, control system.


	 


	<img src="http://www.mhsc009.cn/Uploads/image/20230721/20230721154606_17811.png" alt="" /> 


	 


	Characteristics of IMPRESIND gas radiant heating system 


	 


	Thermal energy generation system 


	The burner burns natural gas, and the hot fluid generated flows in the radiation tube under the drive of the smoke exhaust fan (vacuum pump), and the high temperature surface of the radiation tube stimulates the far infrared radiation wave. After the heat exchange of the hot fluid inside the radiation tube, part of the product will be recycled through the premix chamber (about 40%), and the other part will be discharged outside by the smoke exhaust fan.Secondary heating to achieve energy saving, environmental protection, high efficiency, reduce operating costs.In order to protect the normal use of the equipment in extremely cold weather, the use of the burner is not frozen, no wax, when the equipment reaches the set temperature to stop running, the thermostat can automatically implement the pre-set temperature (10-40℃), to prevent the components in the generator from being damaged by low temperature, the filter ice.


	 


	Radiant tubesheet system 


	The radiation tube is made of real double-sided aluminized black gray alloy steel, which greatly improves the radiation efficiency and does not lose paint color.No distortion, damage, corrosion resistance, oxidation resistance to ensure service life.The aluminized steel is subjected to high temperature heat treatment in a strictly controlled temperature and humidity environment (black and gray surface is not coated or painted), the surface heat radiation is more uniform, and the thermal radiation efficiency is higher, thus ensuring that the heat is more uniform, and the radiation conductivity and thermal efficiency of the aluminized steel radiation tube are still efficient and stable even after many years of use.


	 


	Intelligent control system 


	Comfort, economy, night antifreeze mode and holiday mode can be set according to the user's use;It can automatically operate at the set temperature without manual adjustment within a week.With automatic opening and closing function on time, the equipment automatically stops when the ignition is unsuccessful, and restarts after the microcomputer detects the air source, power supply, negative pressure value and other safety protection devices are normal.Can be set at any time, any temperature of any device.


	 


	Because the gas radiant heating system realizes the heating without open fire and the completely safe opening and closing and negative pressure operation, it provides a reliable guarantee for the safe operation of the heating system.In addition, the radiation tube plate of the gas radiant heating system can be arranged according to the location of the working area in the building, which can effectively improve the utilization rate of the heating equipment.The radiant tube plate can be set on the steel beam in the workshop, which does not occupy the area of the ground working area, effectively improves the use area of the processing workshop, and is both beautiful and practical.

国产精品视频免费一区_国产迷晕暴力玩弄网站_超碰成人免费_www.狠狠操.com_国产精品一区二区av麻豆_国产又粗又黄又爽又硬的软件

Characteristics and advantages of IMPRESIND gas radiant heating system