成人高潮片免费视,国产精品页,一个人免费观看的WWW视频

Ceiling hot water radiant panel heating efficient energy saving 30%~50%

time：2024-09-06
hits：932次
source：正弘奧能

In some large space industrial plants, the requirements for heating conditions are high, and the airflow speed caused by heating should not be too large. In the convective heating process, cold and hot air has been circulating, which will affect the comfort of the human body, in contrast, radiation heating basically does not cause air flow, and the heat loss is small, and the building envelope can only absorb heat from the indoor air and dissipate heat to the outdoor through its surface. 
 

	The ceiling hot water radiation panel is a kind of metal radiation panel, which can be used for comprehensive heating of buildings with a height of 4m~30m and local area or local work place heating, and its use is very wide, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions.


	 


	<img src="http://www.mhsc009.cn/Uploads/image/20240906/20240906093805_21455.jpg" alt="" /> 

 
The layout of hot water radiant panel is very important to optimize the design of heating system and ensure the uniform distribution of irradiance in indoor activity area. Generally, the arrangement of the ceiling radiant panel should be set parallel to the longest outer wall, or perpendicular to the outer wall if necessary. The specifications of the radiant panel row set along the wall should be greater than the specifications of the radiant panel set in the middle of the room, which is because the heat load of the heating system is mainly determined by the heat consumption of the heat transfer of the envelope structure and the heat consumption of the cold air invading or infiltrating through the external door and window. Therefore, in order to ensure the uniform distribution of irradiance in the indoor working area, the different thermal needs of different areas of the indoor space should be considered, such as setting large specifications of radiation panels on the external wall to compensate for the heat loss at the external wall. 
 

	By Beijing Leadway Power Co., LTD. Promotion and sales of the ECOPAN hot water radiation panel is made of metal tube plate. On the housing, wrap 2/3 of its surface with 1/2 "or 3/4" diameter electrically welded or unwelded steel pipe. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety.


	 


	<img src="http://www.mhsc009.cn/Uploads/image/20240906/20240906093816_41653.jpg" alt="" /> 

 
The ECOPAN hot water radiant panel consists of 4 and/or 6 meter modules. Each ECOPAN hot water radiant panel can be connected with a quick connector. Make the operation of the construction site easier, optimize the time, and thus reduce the cost. The side is formed in the board, easy to place the insulation material, the head of the pipe lining is welded perfectly, and the joint cover is easy to position, so that the installation time is shortened. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panel panels have a higher thermal output than other products on the market. High heat exchange efficiency, small temperature gradient, uniform heat and cold, 30%~50% energy saving than conventional floor heating and convective heating.

国产精品视频免费一区_国产迷晕暴力玩弄网站_超碰成人免费_www.狠狠操.com_国产精品一区二区av麻豆_国产又粗又黄又爽又硬的软件

Ceiling hot water radiant panel heating efficient energy saving 30%~50%